FD-VS0301
61560040057 WD615 intake valve seat insert
46.10 × 38.00 × 7.50
Listed OD × ID × height (mm)
FARDRIVE · Global B2B enquiries
Valve seat inserts for your engine repair or batch order
Match the seat insert to the engine version, position and drawing. FarDrive coordinates intake and exhaust specification enquiries, sample requirements and bulk quotations for buyers worldwide.
Include the reference or engine, quantity and destination. Attach a drawing or labelled measurements when available.
- Drawing and sample review
- Written quotation terms
- Technical and after-sales coordination
First drawing-based sample free
For valve guides and valve seat inserts, the first sample is free when you provide a drawing. Send your drawing and requirements to Taylor Yang to confirm the specification, sample quantity and delivery arrangements. Freight, tooling, development and any other charges are confirmed separately before proceeding.
Send your drawing & requirements ↗Global B2B enquiries
Compare existing specification references
Selected from the existing owner-confirmed specification batch. This is a reference shortlist, not a stock or sales ranking. Open each detail for nominal, measured and finished-condition notes.
FD-VS0302
81560040037 WD615 exhaust valve seat insert
42.10 × 34.00 × 7.00
Listed OD × ID × height (mm)
FD-VS0303
A 541 053 17 31 OM501 / OM457 intake valve seat insert
43.08 × 34.50 × 7.00
Listed OD × ID × height (mm)
FD-VS0304
A 541 053 05 32 OM501 exhaust valve seat insert
39.08 × 30.50 × 7.50
Listed OD × ID × height (mm)
FD-VS0305
A 457 053 13 32 OM457 exhaust valve seat insert
41.08 × 32.50 × 7.00
Listed OD × ID × height (mm)
FD-VS0306
3940152 Cummins 6L intake valve seat insert
44.08 × 36.50 × 6.80
Listed OD × ID × height (mm)
FD-VS0307
3940153 Cummins 6L exhaust valve seat insert
40.08 × 32.50 × 7.20
Listed OD × ID × height (mm)
From a part requirement to an agreed order
Send your part information
Provide the OE or FarDrive reference, engine version, drawing or sample information, and quantity per line.
Confirm the specification
Clarify dimensions, material, inspection scope and open questions with the supplier before sample approval.
Review the offer and sample
Check the quoted specification, packing, sample arrangements, delivery terms and destination requirements.
Agree the batch requirements
Confirm the accepted specification and commercial terms in writing. FarDrive coordinates subsequent technical and after-sales questions.
Product and application
Valve seat inserts sit in the cylinder head and provide the seating surface where the valve closes. Sourcing discussions cover engine repair, rebuilding and batch component procurement.
Manufacturing coordination
I am stationed at the factory in Rushan, Shandong, China, and work on site every day. I coordinate your technical requirements, quotations, samples, production progress and agreed inspection requirements directly with the factory team.
Specifications and supply requirements
Drawings, samples or application requirements guide material, hardness, dimensions, tolerances and inspection discussions. Order quantity and lead time are confirmed for the specific project.
How to request a quotation
Provide OEM/OE reference, engine model, drawing or sample, dimensions, material requirements, quantity, destination and packaging needs. If specifications are incomplete, describe the intended application.
Valve seat insert lookup and drawing review
Identify intake or exhaust and state whether a standard or repair-size part is requested. Compare OD, ID and height, and add the working angle only when the drawing specifies it. Catalogue dimensions do not establish pocket interference, machining procedures or confirmed interchangeability. Record the drawing revision and inspection requirements before sample approval.
Search the catalogue by OE or dimensions · Read the valve guide and seat insert RFQ checklist
Specifications and order requirements
- Material
- Material agreed with the factory according to application and project requirements.
- Dimension range
- Dimensions confirmed against drawings, samples or dimensional requirements.
- Engine application
- Engine application checked against engine model, OEM reference and application requirements.
- MOQ
- Minimum order quantity discussed for the specific product, manufacturing requirements and order quantity.
- Lead time
- Lead time agreed according to sample approval, quantity and factory scheduling, and confirmed in writing before ordering.
- Packaging
- Packaging discussed according to shipping, quantity and buyer requirements.
- Sample policy
- For valve guides and valve seat inserts, the first sample is free when you provide a drawing. Send your drawing and requirements to Taylor Yang to confirm the specification, sample quantity and delivery arrangements. Freight, tooling, development and any other charges are confirmed separately before proceeding.
- Quality control process
- Inspection scope and acceptance requirements agreed in writing with the factory against drawings, approved samples and project requirements.
Procurement questions
What do I need for a valve seat insert quotation?
Send the engine model or OE reference, drawing or sample, outer and inner diameters, height, seating geometry, material requirements, quantity and destination. Identify inlet and exhaust applications where relevant.
How is a valve seat insert matched to my project?
The application, dimensions, seating geometry and material requirements are reviewed with the manufacturing supplier before sample or order confirmation. Compatibility is confirmed for the specific project.
Can I start with a drawing or an existing sample?
Yes. FarDrive coordinates a feasibility review with the supplier. For valve guides and valve seat inserts, the first sample is free when you provide a drawing. Send your drawing and requirements to Taylor Yang to confirm the specification, sample quantity and delivery arrangements. Freight, tooling, development and any other charges are confirmed separately before proceeding. For other products, sample costs are agreed per project. Production follows written specification and sample confirmation.
Are minimum quantities, prices and lead times fixed?
They depend on the product, materials, manufacturing requirements and quantity. FarDrive confirms the quotation, agreed inspection requirements and delivery terms in writing before an order.
Toyota 2L / 3L / 5L Valve Guides & Valve Seat Inserts — enquiry checklist →
Send the part details you have
You can start with a reference, a drawing or a worn sample description. Mark unknown fields for review. State the destination country or port so shipping and document requirements can be checked for the order.